It is a very popular roof model for international projects especially from Japan. With non-screw-off mounting systems, the roof sheet are composed of a high rib, so it can support a very good amount of rainfall. This roof can be bent and connected, but it prefer the same length continuously to prevent water leakage that […]

It is a popular roof model for a large to medium-sized general project. With the installation system using the screwing on the connector and purlin and then attach the roofing sheet onto the connector. It makes the roof surface does not have screw trace thus greatly decrease leakage. Easy to install and doesn’t require seamer […]

It is a very popular roof model for international projects especially from Japan. Mounting system does not require using screw on the roof sheet together with high ridge make it very good watertightness. This roof can be bent and connected, but it prefer the same length continuously to prevent water leakage that may be caused […]

Top roofing model which can be used versatilely as roof and wall. It is inexpensive. With the width as wide as 760mm after the overlay, it can support good amount of rainfall (depending on type of the building, please consult). TBR 760B internal vent are designed to prevent some amount of water after the overlay […]

This roof is a versatile model. It can be a good roof to accommodate the rainfall (recommend to pair with connector). It can be used as a wall and can be rolled or curve roll for beauty.   System: bolt Rainfall support: good Rib height: 38 mm Roofing width: 750 mm Suitable for roof with […]

This model of wall and ceiling sheet is designed for beauty, simplicity, easy to use and inexpensive. Because of its wide panel, it is popular as ceiling, wall and partitions. It can be installed both vertically and horizontally.   System: bolt or rivet. Rib high: 6 mm Roof width: 890 mm Suitable for walls and […]

This roof type is specially designed to support a lot of weight. It is considered to be the best non-screw metal roof which can greatly support large amount of rain or snow. With the ridge as high as 180 mm, thus commonly used with thicker steel so it’s suitable for large buildings. This model can […]

This model is designed to support large amount of rain water with the ridge as high as 180 mm. It can be used as a roof and ceiling as well. It has beautiful shape, simple and dimensional, ideal for medium-sized buildings or more and popular as outdoor ceilings.   System: Bolt Rainfall support: very good […]

This wall sheet is a model designed for beauty and strength. With the curving appearance that may not seem very high (25 mm). But with the slope of the curving which is very steep and evenly arrange makes it good for absorbing impact. Moreover, the installation will also increase the strength of the structure. With […]